What is the storage of housing?
Store in dry, shady, insolent space.
Description of the source of metal parts used in the factory
The source of metal used in CROWNLINK is not produced by the Democratic Republic of Congo and its surrounding countries.
Terminal Crimping on single or double layer(FPC/FFC)?
be concerned with as below:
1.Ductility of PET Material
2.Printing ink surface or other side
3. minimum R angle of Crimping mold
What’s the thickness of the FPC/FFC with Terminal 2808 series?
Does the electroplating process with Potassium Gold Cynaide
What’s the material of Housing? Temperature?
What’s the material of Housing? Temperature?
PBT, PA66,LCP etc.from TAIWAN CHANG CHUN and NAN YA.
please see each of drawing of Temperature range on the wesite.
Why is it difficult to assemble with the terminal of big pin number inserted into the housing?
The resistance of small pin number is small, the resistance of big pin number is big, just like a bamboo chopstick is easy to break, the principle of a bamboo chopstick is not easy to break.
UL certification of contacts?
Contacts belong DC signal for membrane switch ,according to UL Electrical appliances specification, the plug or connector are exposure to products with AC power cord must be the UL certification.
What is the advantage of your contacts on raw material?
Comparing the brass, phosphor bronze has better characteristics on elastic, endurance resistance, wearability,corrosion resistance, conductivity, low fever etc.It will not cause shape changed and has better usage life.
1|9